EC Flashing Kit
46,00 € – 95,00 € (ex. VAT)
Overview
The EC flashing kit is a set of tools for external flashing and debugging the EC firmware on NovaCustom laptops, intended primarily for programmers and hackers. The kit can recover an EC from a bad flash, read debug logs from the EC, and flash any firmware irrespective of the state of the current firmware.
Documentation:
Instructions: EC firmware recovery
Please choose your Development Board below:
Additional information
| Weight | 1 kg |
|---|
Description
The EC flashing kit is a tool for externally flashing and debugging the EC firmware on NovaCustom laptops, inteded primarily for programmers and hackers. The kit can recover an EC from a bad flash, read debug logs from the EC, and flash any firmware irrespective of the state of current firmware.
Offer includes:
- an Arduino Mega 2560 Rev3 original board or Atmega 16U2 replacement
- a 24-pin FFC cable with a 1.0mm pitch, same-sided
- a 24-pin FFC breakout board with a 1.0mm pitch FFC connector and a 2.54mm pitch pin header
- USB-A to USB-B cable to connect the Arduino to the host
- USB-A to USB-C cable for grounding
- a 24-pin 0.5mm pitch top-contact FPC SMT Connector
- FFC / FPC Cable, 24 Core, 0.5 mm, same-sided, 6 ", 152 mm
